• PACKAGE INCLUDED: Door Panel + 6ft Hardware and Rail System + 2 Soft Close Mechanisms+Detailed installation manual. Door panel dimension: 36" W x 84" H x 1-9/16" D. The packaging is reinforced and well protected.
• UNIQUE DESIGN: Tempered frosted glass is durable and easy to maintain while ensuring privacy. Paneled design on the bottom of the door prevent children from kicking the glass.
• EASY INSTALLATION: Door comes unfinished but quite easy to assemble.Just takes you less than 1 hour without a craftsman.
• MORDEN DESIGN & FUNCTIONALITY: This elegant glass barn door not only is trendy decor for our home, but also space-saving door! Ideal for using in tighter places where a normal swinging door may not be ideal. Such as kitchen,living room, closet, pantry, laundry room, study room, office, basement, and so on.

Other products:

10ft double track bypass sliding barn door hardware kit use for double doors (doors not include)

Q: How to choose barn door track size?

A: Barn door track length should be at least of total door width. For example, if you each barn doors is 60'' wide, you will need 2*60'' = 120'' (10FT) long track, your opening will show a half, you can use the track which is a little bit longer and please let your door a little bigger than the opening.

Q: Can the bypass barn door system let the opening show fully?

A: Yes, you can select a longer track, if each door is 60'' wide, you can choose 15ft track kit

Q: How much ceiling space requirement of the double track bypass system?

A: At least 9" from top of door to ceiling to install.

Q: How much gap of the double track bypass system?

A: This is double track bypass barn door kit, the gap between inner door&wall is about 5/8'' , the gap between two door panels is about 2'' based on door thickness 1-9/16''

Q: How far does the outer door extend from the wall?

A: It is about 6''

The barn door hanger roller with Professional bearings, make your bypass barn door hardware service life last longer

About the bearing

• Material quality is high purity bearing steel Gcr15, professional bearing materials, ring fixed structure bearing, wraps around the steel ball and prevent steel ball from leaving the locus, make sliding more stable.
• There is a dust cover the bearing to prevent dust from entering and lubricating oil leakage, let the roller can slide smoothly and more durable.
• 1 hanger with 2 life time lubricated bearing, ensure sliding balance and stability, test beyond 160,000, you can use it for a long time.

About the hanger

• The roller surface is covered with nylon, wear-resisting and slide very quietly.
• We design the Dowel pin Front part slightly larger, keep the dowel stuck in hole not fall off.
• All of prat is make by Q235 carbon steel, thick is 1/4'' (6.3mm)
• 8.8 grade roller bolt can hold the doors comfortably

About all 10 FT Double track bypass hardware

Track: 4 pieces 5ft rails, Pre-drilled 16" apart holes on track, make by solid 1/4" thick steel, with 8.8 grade high strengh bearing capacity lag blots, fit for concrete wall and wooden wall

Track connector: With 4 screws to fastening the track, make the installation more convenient and beautiful

Bracket: low ceiling bracket consists of two parts, split design is equal to 2-layer bearing capacity,bring more stable and load-bearing capacity with with 8.8 grade screws

Track spacer: Provide 1-3/8'' length spacer, fit for door thickness less than 1-3/4", if your door thickness less than 2-1/6 ", we also have 1-3/4'' spacer for you to choose from, If your door thickness is greater than 2-1/6'', you can add a headboard on wall, then install the track and bracket

Door stopper: Prevent the door falling off from the track, one door have 2 stoppers, ensure the stability and safety, with the rubber plug, good damping effect and reduce the noise, have 2 screws to fasten stopper on track, you can put stopper on track where you want to stop your door, easy to remove if you want adjust

Floor guide: can prevent the door swinging back and forth or against the baseboard, let your door slide on same locus, fit for all thickness with grooved or ungrooved doors

Anti-jumper: can prevent door to be lifted off rail when the barn door slide, ensure the stability and safety

Double track barn door bypass instructions step by step with fractional measurements in inch, have detailed word instructions with pictures

Q: Can i cut the track?

A: Yes, you can cut it into any length of you want

Q: Can i use it for out door ?

A: We suggest if use for outdoors, you can make some cover above the track, and you need paint and add oil regularly to extended service life

Q: What accessories is required if I want to install more doors?

A: You can buy an extra set of hangers, you can search the product number (B01KH3OH4E) on Amazon.

Q: What circumstances do I need to add a headboard?

A: 1. If you have a doorway trim or your door thickness greater than 2-1/6''; 2. If the studs don't line up with the pre-drilled holes in the rail

Q: How thick door use for it? What is the weight capacity?

A; We suggest 1-3/8" ~ 1-3/4" thick door, if you use for other thick door, please tell us, we will provide some accessories to you; Each track limited 230lbs.
 

Double track barn door bypass hardware kit package include

4 x 5FT Rail

2 x Track Junction Plate

4 x Steel Hanger with bolt

4 x Door Stopper with Hex Wrench

16 x 1-3/8'' Spacer with lag bolt

8 x Set of Brackets with lag bolt

2 x Floor Guide with screw

4 x Anti-Jumper with screw

1 x Double Track Bypass Barn Door Hardware Installation Manual

Why choice double track bypass system?

1. When your wall width did not enough, the bypass system is only need same width with your opening
2. Complements your locker room, closet, kitchen, wardrobe, bathroom, bedroom, storeroom
3. We have large processing factory and advanced equipment, accept mass customization

You also can install like this

1. The bracket is split design, you can install like U shape or install L shape, easy change the style
2. If install like L shape, it need 12'' ceiling space from top of door to ceiling

Bi folding system:

• Track length Fit door leaf width
• 37-3/8" track ≤ 16-3/4"
• 51-3/16" track ≤ 11-3/4"
• 63" track ≤ 14-3/4"
• 75" track ≤ 16-3/8"
• 80" track ≤ 19"

Drawing:

• Fixed roller with spacer X2 + Sliding roller X2
• Roller&door connector X4
• Track X1+Track&wall connector X 1 Set
• Floor guide X2
• Hinge X6

Seal:Seals offered for the door panel(Fit height 84")

Hinge:Suitable for door thickness:1-3/8"~1-5/8"

Track's length | Fully opened door openning's length: